What Repeat Order Service Covers
Our repeat order service is set up for print shops that regularly use the same screen size, mesh count and frame type. Instead of starting from scratch each time, we work from your approved details and prepare the next batch to match the last order as closely as possible. That is useful for regular garment runs, signage work, label printing and seasonal work where the artwork changes but the screen spec stays the same.
We handle repeat supply for screen-printing mesh and pre-stretched aluminium frames, with options for the mesh count that suits the ink and detail level needed. Common working ranges include lower counts for heavier ink deposit and finer counts for detailed work or smoother print surfaces. If your job needs a particular open area, thickness or off-contact behaviour, we keep that in mind when matching the repeat.
- Same screen dimensions and frame profile
- Matched mesh count and mesh type
- Controlled stretching to repeatable tension levels
- Batch preparation for regular production runs
- Dispatch packing for safe transport to your branch or workshop
How We Keep Your Spec Consistent
Repeat work depends on keeping the practical details in order. We note the frame size, mesh count, print use, tension target and any special finishing requirements from your previous order. If the screen is used for a demanding schedule, we also look at whether the frame should be rechecked before stretching or whether the same format can go straight into production prep. That helps avoid mismatches that waste time on press.
Our team checks the condition of the frame before stretching or re-stretching, because a clean and square base matters for even tension. Mesh bonding and frame clean prep are handled before the mesh is fixed, then the screen is checked again once it has settled. If the repeat order is for a large batch, we keep the screens grouped by spec so there is less chance of mixing counts or sizes. A small mismatch in count or tension can affect print feel, so we do not treat repeat orders as a guess work exercise.
- Review of previous job details before production
- Frame square and surface condition checked first
- Mesh count matched to the intended print method
- Tension checked after stretching and again before dispatch
- Batch separation to reduce mixing between orders
Typical Repeat Order Process
Most repeat orders start with a quick enquiry through our contact page. Once we have your job details, we confirm the format, quantity and the last known spec. If anything has changed, such as artwork detail, ink type or press setup, we adjust the screen count or frame size with you before production starts. For regular customers in Germiston, Johannesburg, Pretoria, Durban, Cape Town and Gqeberha, the process is kept practical and direct.
After confirmation, we prepare the screens, carry out tension checking and pack them for dispatch. Where needed, we can also include frame re-stretching or screen inspection if an older screen is being repeated rather than remade. The aim is simple: less back and forth, less waiting, and fewer setup surprises when the screen reaches your press. If you have multiple sites, we can separate orders for East Rand Supply, Midrand Delivery or another branch area as needed.
- Send your repeat request through the contact page
- We confirm the previous spec and any changes
- Production prep and tension checks are completed
- Order is packed and dispatched to the correct area
- Follow-up support is available if the spec needs reviewing
Turnaround And Scheduling For Regular Orders
Turnaround depends on the size of the repeat batch, the current production queue and whether the order needs new stretching or re-stretching. We plan repeat work in a way that suits ongoing print calendars, especially for shops that run weekly or monthly production cycles. If you know your stock use pattern, it helps to place the next repeat before the last screen is fully used up, because then there is time to compare the old and new screens side by side.
For coastal deliveries into Durban, Cape Town and Gqeberha, we also consider packing and transport conditions so the screens arrive in good condition. Aluminium frames travel well, but mesh still needs sensible handling, especially in humid weather or during hot inland transport. If a repeat order is going into storage before use, we can advise on keeping it flat, dry and away from direct sunlight. That matters when load-shedding or workshop downtime causes screens to sit longer than planned.
Pricing Approach For Repeat Work
Repeat order pricing is based on the screen format, mesh count, frame size, quantity and the amount of preparation needed. A straightforward repeat with the same dimensions and mesh spec is usually easier to process than a screen that needs inspection, cleaning, re-stretching or a different count. If your job involves several similar screens, we can assess them as a batch so the pricing reflects the actual work rather than charging each item as if it were completely different.
We do not list fixed rates here because repeat orders vary by size and spec, but the approach stays practical. The more consistently you keep your order details, the easier it is to quote and repeat without delays. If you are ordering for a regular production line, it also helps to keep one person in your shop responsible for confirming the spec each time, so the wrong count or frame size does not slip through. That small step saves money and avoids rework later on.
Maintenance Intervals And When To Reorder
How often a repeat screen should be replaced or re-stretched depends on use, cleaning method, ink type and how carefully it is handled on press. Screens that are used daily will usually need more frequent checking than screens used once or twice a month. If you notice tension drop, mesh wear, pinholes, blocked detail or frame damage, it is time to review the spec rather than waiting for a failed print run. A screen that still looks usable can still be out of spec for clean printing.
For repeat customers, we recommend checking the screens on a simple cycle that fits the workload, especially in busy shops where the same format is used over and over. Keep an eye on edge wear, frame movement and mesh looseness after cleaning. If you have been running the same screen through harsh wash-downs or long storage periods, it may need replacement sooner. In many cases a planned repeat is better than a rush order after the screen has already failed, because that keeps production steadier and less stressful.
- Check tension after repeated wash cycles
- Review mesh condition before a new production run
- Replace or re-stretch when print quality starts drifting
- Store spare repeat screens flat and dry
- Schedule the next repeat before the current screen is worn out
Key facts
| Service area | Germiston, Johannesburg, Pretoria, Durban, Cape Town, Gqeberha and other South African print shops |
|---|---|
| Repeat items | Screen-printing mesh and pre-stretched aluminium frames |
| Common mesh use | Coarser counts for heavier ink deposit and finer counts for detail work |
| Preparation checks | Frame clean prep, mesh count matching, tension checking and screen inspection |
| Delivery options | Dispatch packing for local supply and branch deliveries |
| Order method | Enquiry form on the contact page |
