A Compact Frame for Small Print Work
The 34cm frame suits printers who need a smaller working area for labels, test pulls, spot colours and short-run sampling. It gives you a neat, manageable frame size for jobs where a full large-format screen is not required. In busy print rooms around Germiston, Johannesburg and Pretoria, this size is often kept ready for quick changeovers and repeat work.
Because it is pre-stretched, the mesh arrives ready for use with consistent tension across the print area. That helps keep detail steady on fine lines, small text and simple artwork where even pressure across the screen is important.
- Best for small graphics and sampling
- Easy to handle on a compact press setup
- Useful for repeated short runs and test prints
What the 34cm Frame Includes
This product is a pre-stretched aluminium frame fitted with screen-printing mesh and prepared for immediate use. The frame is built for everyday handling in shop conditions, including regular washing down, exposure to inks and the normal movement that comes with screen setup and cleanup.
The aluminium frame is lighter than many traditional wooden options and holds its shape well when handled properly. That helps with registration and keeps the screen flatter over time. For shops working through load-shedding schedules, a frame like this is useful because it does not depend on power or gas to do its job.
- Pre-stretched mesh fitted to the frame
- Aluminium construction for stable handling
- No electricity or gas needed for use
Mesh Count Options and Print Use
Mesh count affects how much ink passes through and how much detail the screen can hold. Lower counts suit heavier ink deposits, while higher counts are used for finer detail and thinner ink layers. The right choice depends on the artwork, ink type and substrate. MeshMaster matches mesh count to the job so the screen behaves as expected at press level.
For small designs, a 34cm frame may be supplied with mesh selected for detail work, general textile printing or more open stencils depending on the job. If you are printing on fabric, paper, board or similar surfaces, it helps to confirm what image size and ink system you are planning to use.
- Lower counts for heavier ink deposit
- Higher counts for finer detail
- Mesh choice depends on artwork and ink type
Where This Size Works Best
The 34cm size works well for print shops handling sample runs, label work, promotional items and smaller artwork layouts. It is also useful for hobby printers who want a screen that is easy to store and quick to mount. In Durban and Gqeberha, where coastal humidity can affect storage and drying times, a smaller frame can be easier to keep clean and dry between jobs.
For municipal and retail print work, this size is handy when you need to process a limited number of items without setting up a larger screen. It is also suitable for workshops that do frequent reprints, because the smaller format is quicker to inspect, clean and reuse.
- Sample prints and proofing
- Short production runs
- Smaller artwork and repeated spot jobs
Installation, Setup and Power Needs
Installation is straightforward because the frame arrives pre-stretched and ready for screen setup. In most cases you only need the usual screen-printing bench, clamps, squeegees and your normal drying area. No special power connection or gas supply is needed for the frame itself.
When fitting the screen into your workflow, check that the frame sits square, the mesh is clean and the stencil area is aligned with your artwork. If your shop has mixed jobs through the week, it helps to keep the 34cm frame marked for a specific mesh count or application so there is less confusion on the floor.
- No power or gas requirements
- Works with standard screen-printing tools
- Best kept labelled for the right job type
Care, Re-Stretching and What to Check When Ordering
To keep the frame performing well, wash it after use, dry it properly and store it flat or in a protected rack. Avoid leaving ink, cleaner or damp mesh on the frame for long periods. In humid areas or in shops that close up tight during the day, good drying practice matters because moisture can affect mesh condition over time.
If the screen needs attention later, re-stretching and tension checking can help extend its service life. Before ordering, check the mesh count, the size you need, the artwork area, and whether you want a single frame or repeat order support. If you are not sure, send your query through the contact page and we can advise on the right setup.
- Check mesh count and artwork size
- Confirm whether the job needs fine detail or heavier ink
- Ask about re-stretching, inspection and repeat orders
Key facts
| Product | 34cm pre-stretched screen-printing frame |
|---|---|
| Frame material | Aluminium |
| Use | Small designs, tests and short-run sampling |
| Mesh | Supplied in matched mesh counts for screen printing |
| Power or gas | Not required |
| Service areas | Germiston, Johannesburg, Pretoria, Durban, Cape Town, Gqeberha |
